Description

Griffolyn® Sealant Tape consists of a Griffolyn® reinforced backing and a synthetic elastomeric adhesive. A white release liner is used to protect the adhesive and must be removed prior to use. The adhesive is gray in color.
PHYSICAL PROPERTIES AND TYPICAL VALUES
Property U.S. VALUE METRIC VALUE
Standard Weight 4″ x 50″ Roll 3.0 LBS 1.4 KG
Adhesive Thickness 20 MIL 0.51 MM
Total Thickness 26 MIL 0.66 MM
Application Temperature 10 – 140 F -12 – 60 C

Installation Recommendations:
The surface to be taped should be clean and dry. The tape will not adhere if the surfaces are to properly prepared. Dirty or wet surfaces should be completely cleaned with water, paper towels, dry rags or other materials which will prepare the surface for the tape. Accumulations of dust should also be removed to insure a secure seam. The product obtains optimum adhesion when the surfaces to be bonded are warm. The surfaces should be above 30° F to insure an acceptable bond. In order to obtain a bond at lower temperatures, external heat may be required. The use of an industrial style hot air blower is one recommended method. Extra care should be taken when attempting to install tape at temperatures below 10° F.

4″ Wide x 50′ Long Roll (White)